BORPower® NanoGreen MS-600Nano Boron motor interior coating: MS-600!
Feature image
Download EN-Material safety data sheet
Download DE-Metarial safety data sheet

Download EN-Product information

Download DE-Product information

■ About the product

For Light Commercial Vehicles (pickups, vans, minivans etc.)

Can be used in all vehicles with four-stroke engine with a capacity of 6-18 liters of oil safely. BORPower® NanoGreen MS-600 is a nanotechnology-developed high-tech product of the element boron, which has extraordinary tribological properties and sets new standards in lubricants technology.

BORPower® NanoGreen MS-600 has been developed to optimize the function of the motor and to protect in long term. BORPower® NanoGreen MS-600 reaches its coating and ball bearing effect the reduction of friction, wear and corrosion in the engine.

BORPower® NanoGreen MS-600 is first in the world, because it is not like many lubricant additives which trigger chemical reactions, but the effect is PURELY PHYSICAL.

BORPower® NanoGreen MS-600 contains active substances like MCDP (Mono Crystal Diamond Powder) and nano boron, which are pressed under high pressure into the rough metal surfaces and form a protective film with almost diamond-hard, smooth layers. Those nanoparticles that were not pressed, take a homogeneous heat distribution and a ball bearing function between the MCDP layers.

  1. Advantages
  2. - Improved engine power(Up to 10% and more)
    - Reduces fuel consumption (Up to 15% saving on gas & diesel)
    - Minimizes CO2 emissions (Up to 30% reduces exhaust emission)
    - Lower engine oil temperature (Up to 20 % lower temperature)
    - Reduces friction & wear (Up to 99% reduces solid particles)
    - Protects against rust & corrosion
    - Extends maintenance intervals
    - Reduces noise levels
    - Soft and Smooth engine running
    - Reduces particulate emissions (Up to 99% reduces solid particles)
    - Longer service life of the units (Up to 100% of motor oil life increase)
    - Highly active anti-wear
    - Improves cold start
    - Excellent runflat

    Before using BORPower® NanoGreen MS-600 (400 ml) leave 10 minutes to warm up your engine. Shake the bottle for at least 2 minutes (the distribution of the nanocrystals). Empty BORPower® NanoGreen MS-600 in the engine and let the engine run for at least 10 minutes or drive 20 km.